How can we serve you better?
At Dispensr, we are dedicated to offering you a great service – if you have any questions or problems, take a quick look through the FAQ section below to see if your question can be answered. If not, please contact us by phone, email or with our contact form. We will respond as quickly as possible to ensure that you receive a great experience from all of our products.
Can CBD flower / extract make you fail a drug test?
It’s not guaranteed that you’ll fail, yet it is best to assume that it could lead to a fail. There is a chance that a drug test that is looking for cannabinoids could be failed if CBD has been consumed.
Do CBD flower / extract get you high?
The shortest answer is NO. CBD is not a cannabinoid that affects judgement or makes people feel ‘high’.
How does CBD flower / extract make you feel?
Vaping CBD flower allows you to absorb many more of cannabinoids in the plant (see CBN, CBG, among others).
Vaping or injesting CBD extract in it’s purified form means that you are absorbing a much more concentrated amount of CBD than vaping flower. Yet it really depends on the amount and concentration of CBD you intake. So take it slow and build up.
Can you vape CBD flower / extract?
Absolutely! In fact, we believe vaping CBD flower is the best way to get a broad spectrum of natural cannabinoids into your endocannabinoid system.
Our CBD extracts & other CBD crystal forms can be dabbed or vaped for easiest consumption. Vaping has been proven to be one of the most efficient methods of CBD intake. CBD extracts can also be eaten, taken sublingually (under the tongue), or added to food & drinks if that is easier for you.
Is CBD flower / extract safe?
We test all of our CBD extracts and provide the lab results. If used correctly and from quality tested sources, CBD extracts are considered safe.
Are CBD flower / extract indica or sativa?
Most strains are a hybrid these days. According to Robert C Clark, his research states that the question itself might not be valid when understanding strain types.
Do I need a special vaporizer for CBD extracts?
In principle no, yet some vaporizers may need a special adapter or some organic hemp to use as a wick, as extracts go through a liquid stage during heating before turning to vapor.
A Vapcap can use a Dynacoil. Alternatively, you can use a hemp or cotton wick. Another option is to use hemp flower as a wick and just sandwich the crystal between two layers of dried flower material. Works great for us!
Can I use CBD extracts any other way?
You can cook with CBD extracts, make nice coffee drinks, eat it pure, or sprinkle it on your favourite meal.
How do I store my CBD flower / extract?
A cool, dry & dark cupboard is the best storage place for CBD extracts. Another option is the top shelf or top of the door since they are the warmest part of the refrigerator. Our glass jar is good for storing your CBD extracts, yet with CBD flower a humidity pack can help maintain a good balance of humidity while retaining its great flavour. See packaging storage instructions for more details.
Are CBD flower / extracts legal?
According to Dutch law, CBD products containing less than < 0.2% THC are legal in the Netherlands. This amount varies from country to country (e.g. 0.6% in Italy). All of our products are tested and approved within the legal limits of EU and Dutch law. Feel free to have fun!
Will my package be discreet?
All of our packages are plain & unmarked with no need for a signature unless chosen as a delivery option. Just fast, discreet and direct to your door via the relevant shipping company or regional postal service.
Are my details secure & private?
My delivery has not arrived/is late, what should I do?
The COVID-19 pandemichas created regional shipping delays that vary per region and change regularly. Please keep this in mind when ordering. We recommend you opt for track & trace delivery when available.
After your purchase, you will receive an email with a track & trace code. When your location is outside of the Netherlands, this may be transferred to a local postal service. Please be advised. If your track & trace code has failed or is no longer available, please contact us via our Contact page.
I need to return my purchase, what’s next?
In order to return a product, you must have a Returns Merchandise Authorisation (RMA) Number from our Customer Service Team. Any unsolicited or unauthorised returns without a RMA number sent to us will be disposed of. Returns MUST be received within 10 working days of the RMA Number being issued. If an item is not returned within this time frame, we will no longer be able to accept it. See Warranties & Returns for the specifics.
I need to exchange my purchase, what’s next?
If you ordered the wrong product, we can exchange it as long as it is safely returned to us unopened and unused within 14 days of receipt. We do require that you pay for the return postage and packaging. Please contact customer services and request an RMA Number to ensure a speedy turn-around. See Warranties & Returns for the specifics.
I have an payment issue, what’s next?
If you have an incorrect charge, stolen credit card, etc… please contact us via our Contact page.
I see you give away free vaporizers, how does that work?
We give away vapes and more to our fans and customers regularly if they are signed up for our newsletter. Feel free to sign up on the homepage for a chance to win!
How are the devices made?
All of our devices are hand made by Dreamwood in Germany. They use the highest quality woods and great blass blown in the E.U.
How does a Punch work?
Your new Dreamwood comes with everything you need for immediate use, except for butane. Simply pull the Dreamwood apart gently undoing the magnetic connection, fill the chamber with your material, reassemble the Dreamwood, and you're ready to go.
Fill the included lighter with the best-quality butane gas, make the flame size approximately 3-4 cm, and hold the jet flame slightly above the air intake.
Enjoy the cool convection, wonderfully tasty vapor. If disassembly is necessary, place O-rings into the prepared holes in the wood before the stems for best airtight seal.
How does a Glow work?
The glow is designed to work with almost all standard 510 battery mods that many people own for juice vaporizers. It uses these standard coils to generate heat to allow for convection vaporisation.
Your new Glow comes ready for immediate use, except for the battery mod. Simply pull the Glow body and mouthpiece apart gently breaking the magnetic connection, lightly fill the chamber with your chosen material, put the Glow back together, and you're ready to vape. Enjoy the super smooth and incredibly tasty convection vapor.
Screw your Glow vaporizer to the battery mod, & set 30-35 watts of power. Pull the mouthpiece out of the top. Then press the fire button on the battery mod until the heating wires glow, briefly blow in to cool down and repeat.
The heating wires must glow evenly! Otherwise, the heating wires must be aligned, for this, the top part must be removed from the base.
Can I repair my Glow?
First, switch off the battery mod. Never touch the heater when the battery mod is on. RISK OF INJURY!
Changing Heating Coils: The heating wire can be changed as desired. To do this, switch off the battery mod and remove the upper part from the base as described. Loosen the screws and remove the wires. Then insert new heating wires, screw and align.
The wires must only touch the screws on the + and - pole, nothing else! Switch on the battery mod and briefly heat the heating wire at 30-40 watts to check whether the wires glow evenly.
If this is not the case, please check the screw connection again and align the wires. Then put the top back on, done. If you change to other than the delivered coils, Please slowly increase the wattage and test until vapor comes to find the right temperature and not to burn the herbs.
My coil glow is uneven.
When pulling off the upper part, slightly wiggle it and turn it. Then check the heating wires. These must be firmly screwed on and must not touch anything except the screwing points at the + and - pole.
Align and fix the heater wires if necessary, then switch on the battery mod and let the heating wires glow briefly at 40 watts to check whether they are now evenly glowing. Switch off the battery mod again and put on the upper part carefully.
Important note : Please treat the inner rim of the cover with some woodwax to assemble the parts without damaging the o-rings.
Is it safe to repair my Glow?
This vaporizer requires some experience with electronics, if you have any problems please contact us!
~ The heating wires must be the same length! We do not recommend using heating wires below 0.15 ohm, as this puts too much stress on the battery cells! (2x0,3ohm = 0,15ohm)
~ Quality batteries with min. 30A to be used!
~ Never touch the glowing heating wire and never press the fire button when touching the heating wire! RISK OF INJURY!
~ A battery carrier with a 18650 battery is sufficient for about 10 herbal loads, a battery mod with 2x 18650 batteries is enough to evaporate about 20 fillings.
~ Concentrates can be wrapped in organic cotton / hemp wool or sprinkled on herbs to evaporate them.
~ Use and repair at your own risk!
Vaporizer wood care
As well as the usual maintenance for everyday use such as cleaning of debris and build up, the wood will also need to be looked after to ensure that your products lives a long life. Dreamwood products ship with a wood butter to allow for the care of your chosen dreamed vaporizers. Looking after the wood will ensure that your vaporiser lasts a long time and will always perform optimally as well as looking its best.
Submerge your atomizer (ceramic plate side down) in 1cm of Isopropyl alcohol for two hours. Dry the atomizer completely before reattaching to your battery. Do not try to poke, scratch, push, pull or move the ceramic plate in any way with any tool as this may permanently damage your atomizer. Also, check out our cleaning video.
Unscrew the glass mouthpiece tube from the metal filter section. Soak the filter section in Isopropyl alcohol for two hours to clean it. Using a Q-tip soaked with Isopropyl alcohol, gently rub the inside and outside of the glass tube as well as the metal base until clean.
Using the original Hypnos battery with the Zero Atomizer
All parts from the Linx Hypnos line are interchangeable, feel free.
Why is the Hypnos Zero keep flashing white?
The Hypnos Zero flashes white 10 times when the battery is depleted. Charge the battery fully before next use.
The battery will also flash 10 times when the power button is held for 15 seconds. This indicates that the overheat protection feature is triggered and your device will be shut off automatically. Press the power button 5 times to turn back on the device.
My Hypnos isnt working?
Be sure to use stable extracts that are hard or wax type extracts for best results, runny oils are not recommended.
Apply a small amount (0.05 - 0.1 grams) of extract on the bottom of the atomizer, DO NOT try to fill the chamber, less is more! Hold down the power button while inhaling until you are finished with your hit. Always keep inhaling for five seconds after releasing the power button to draw cool air in to the device.
Store upright with the Cap on when not in use. Always turn the device off when not in use to prevent accidental activation by pressing the power button five times quickly.
For optimum vapor quality, always keep your Linx Hypnos Zero clean. You can find the cleaning video here.
Using a 510 battery & cartridge
Hypnos atomizers are compatible with most 510 batteries & atomizers, however some may not make a connection and might not allow for the optimal effect.
Dark marks on the plate
It is normal for the plate to turn dark at times. The device will function the same way and it will definitely not affect your vaping experience. Do not try to poke, scratch, push, pull or move the ceramic plate in any way with any tool as this may permanently damage your atomizer.
For more information, see Hypnos FAQ
PAX 3 heats in as little as 15 seconds. PAX 3's use of lip and motion sensing automatically cool and boost oven temperatures offering significant performance over other conduction vaporizers that only hold the heater at one consistent temperature.
Auto-cooling preserves your material when you're not drawing from the device. Lip presence gives a quick temperature boost to ensure consistent vapor production during back-to-back draws from the device.
PAX 3 features four temperature ranges that are adjustable through the device interface, using the ON / OFF button. Hold the button for 1-2 seconds when the device is on to enter temp set mode. Use short button presses to cycle through temperature selections. Hold the button for 1-2 seconds or shake the device to exit temp set mode.
Celcius: Low: 182, Med-Low: 193, Med-High: 205, High: 215
When PAX 3 is connected to the app, the full temperature range from 360 - 420F becomes available in 1 or 5 degree increments, giving you a 5th customisable temperature setting in addition to the 4 default settings available through the device interface only.
Battery Specs and Charging
PAX 3 comes with a rechargeable 3500mAh Lithium-ion battery and on a full charge lasts approximately 8-10 sessions.
Charge time via USB: 2.5 hours.
Charge time via PAX AC Adapter: 90 min.
A full battery charge is indicated by 4 solid white petals.
A fully discharged battery is indicated by the top left petal blinking red 3 times.
Please Note: Portable electronics containing Lithium Ion batteries present rare, but potentially serious safety hazards, especially under hot or cold conditions. Charging of the PAX device should only be performed at temperatures between 50°F and 95°F (10°C and 35°C). To ensure personal and property safety, never charge your PAX device below 50°F (10°C) or above 95°F (35°C). Never charge or leave your PAX device in a vehicle.
Changing App Temperature
Swipe left or right on the colored circle showing your current temperature setting to decrease or increase your temperature setting in 5ºF increments. Swipe up and down on your temperature selection for fine, 1ºF adjustments.
For more information, see PAX FAQ
We accept all major forms of credit & debit cards within the 31 country European Union. We will authorise the payment when the order is placed and once the products have shipped, we collect the full amount. All transactions are on our SSL network and use 3D Secure payment protection.
We accept credit & debit cards from the following countries : Austria, Belgium, Bulgaria, Croatia, Cyprus, Czechia, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Spain, Slovenia, Switzerland & United Kingdom.
We accept ApplePay through your enabled iPhone for your convenience.
If you are outside of this area or do not have an available card, we also accept direct bank transfers. Please add the order number as a note in your payment so your products can be processed and shipped to you quickly.
Transferwise offers a direct bank transfer service with much lower fees. You do not need an account to use their service. Please add the order number as a note in your payment so your products can be processed and shipped to you quickly.
Digital currency payments are now available offering you increased convenience. We accept Bitcoin, Bitcoin Cash & Litecoin. Simply complete your order using this selection, open your digital currency wallet app on mobile (if applicable) and scan the QR code to transfer the exact amount to our wallet. Upon receiving payment, we will update your order status and you will receive an email confirmation.
When in the Hilversum (NL) area, feel free to stop by Coffeeshop de Leeuw (the Lion) to purchase in cash. Please note that a limited supply of products are available here.
Looking to pay another way? Be sure to get in touch with our expert Customer Service team.
MIGHTY vs CRAFTY?
In general, you can imagine the CRAFTY as the MIGHTY’s little brother. For a detailed listing of the different characteristics, click here.
How is the vapor created?
The MIGHTY, as well as the CRAFTY and the PLENTY, functions with a patented combination of full hot air convection heating and additional conduction so that the air is already heated when it flows into the heated-up Filling Chamber and ensures an immediate and continuous vaporizing. The additional benefit of the heated Filling Chamber is that the material to be vaporized is already heated up and vaporization takes place on the first draw.
Can I use the MIGHTY while charging?
Yes. If the MIGHTY is operated while plugged in, the batteries will be bypassed. Therefore, the MIGHTY can be used even with completely drained batteries, if it is plugged in and switched on.
How do I take proper care of the batteries?
You should store the MIGHTY at standard ambient temperature approx. 20°C, no frost, no direct sunlight, and keep it dry. If the device is not used for a longer time, you should store it at a battery capacity of between 20-80%.
When using the MIGHTY it is best to drain the batteries until about 20% capacity, which is one battery bar and then recharge them fully. From time to time, it makes sense to drain them all the way and then recharge them fully; this will adjust the battery capacity and keep the battery gauge correct.
What materials are used in the MIGHTY?
We have applied the maximum possible care and diligence in all our materials used. All materials are food-safe, heat-resistant, and according to FDA regulations.
How do I exchange the lower Screen?
Remove the lower Filling Chamber Screen out of the Filling Chamber by using a pair of tweezers or a pair of pointed pliers. Insert a new screen and take care that the edges of the screen lock in place into the groove provided.
For more information please see the Storz & Bickel product pages : MIGHTY & CRAFTY
How to clean
The glass tube and cooling unit within, and sometimes also the stainless steel mesh that protects the heater can use a cleaning from time to time. The glass tube with cooling unit can be rinsed with hot water and detergent, or submerged in solvent such as isopropyl alcohol. The internal parts are easily removed by opening a threaded ring in the front panel, and the parts slide out easily.
Tinymight has an adjustable chamber volume, and it works very well with the tiniest amounts of herb as well as greater amounts too.
The standard package of Tinymight includes one Sony VTC6 18650 battery.
Session vs on-demand vape
Tinymight has two usage modes. In ‘session’ mode, the vape heats up automatically and stays at a stable temperature level until turned off. In ‘on-demand’ mode, the vape heats up when the button is held pressed, and when button is released it goes back to standby.
Battery charge time
It takes about one and half hours to charge from empty to 90%.
Tinymight has an adjustable temperature dial on the bottom panel. It has 10 steps with half steps in between, so a total of about 20 different temperature settings are available between the range of 120º - 240º Celsius. It is fully temperature controlled with extremely accurate electronics controlling the heater in real time.
Changing the max. / min. temperature settings
Tinymight allows users to customise the temperature range if the default one is not ideal. Email them for instructions : email@example.com
Sound & vibration
The heater of Tinymight makes some noise while active. It is a result of the high surface area and low mass of the high powered heater. Switching of current to the heater causes small vibrations that can be heard.